Pesch Marine Scheinwerfer Seematz
The SEEMATZ searchlights are constructed of seawater resistant aluminium and have extra hardened BI-VETRAL safty front panes. The reflectors are made of aluminium, on request it will be possible to install a 400W heating into all searchlights with 230VAC input power.
SEEMATZ searchlights are desined to facilitate service. The backside of the searchlights can be opened without using tools by quick-release snaps. Also the cable glands are mounted on the backside cover. This make it possible to remove the compl. plug-in unit incl. the mirror, lamp, socket and the heating only by unlock the quick-release snaps.
This can be importent in case of bad weather conditions !!
Download Seematz Searchlights Brochures:
The column types are designed to operate inside from the wheelhouse. The construction is totally watertight and easy to install. After cutting a hole, the column can be inserted smoothly into the roof. This installation is secure and elegant even at roofs with a thick insulation.
SEEMATZ manuell steerings are available in two different diameters ( 80 or 100mm ).
Every searchlight from the 273 up to the 463 types can be mounted on a 80mm pedestal, except the 463 searchlight with HBO, HMI or XBO lamp. This searchlights and also every searchlight type 525 must be mounted on a 100mm pedestral.
SEEMATZ searchlight type 750 will be delivered with a 120mm diameter column.
Following typs are available
273, 351, 463, 525 and 750 - kind of type = reflector diameter in millimetre.
They can be combined with following lamps
HGS = Halogenlamp
HBO = High -Pressure-Mercury-Lamp
HMI = Metal Halide Vapour Lamp
XBO = Xenon Short-Arc Lamp
ZH = Tin Halide Lamp
and with following steering
DS = direcct operation at the searchlight
DH = direct operation at the searchlight - searchlight will be mounted on a 1m pedestal*
WS = searchlight with a 500mm column into the wheelhouse.*
WH = searchlight with a 500mm column into the wheelhouse on a 1m pedastel over deck.*
EF = searchlightwith a electrical remote control.
* = other length on request
SEEMATZ Wind Screen Wiper “Straight Line”,
Download Seematz Windscreen wipers Brochures:
The SEEMATZ wiper housing consists of seawater resistant aluminium Almg3 - white painted.
All the other metal parts are made of inox or brass. The guide plate for the wiper arm is constructed of the same aluminium, black painted. At this plate four rolls will be mounted made of special seawater and temperature resistante plastic.
The wiper guide is drived via a stainless steel chain, worm drive and two in series connected DC-motors.Both motors are fitted with stainless steel sprocket wheels and are housed in the wiper assembly behind the guide rail.
The wiper arm consists of stainlees steel. The wiper blade consists of seawater resistant aluminium.
A endswitch and also a thermostatically heating (100W) and the necessary tubes for the spray wash facility, are standard fittings also a red LED at the wiper case. This LED indicate when the power to the motors is disconnected. In this case you must check the transport mechanism in the wiper case.
With the SEEMATZ Control-Panel you can control followed functions:
- Wiper on/off
- Group (up to 2 wipers per PSU) on/off
- Heating on/off
- Water / air (if orderd) on/off
- singel sweep
- Potentiometer for 5 time interval and 2 speed
Each switch or button are indicate with a self dimming LED.
Dimensions of the Control-Panels:
1- 3 Wipers = 144 * 72mm
4- 8 Wipers = 144 * 144mm
7-10 Wipers = 216 * 144mm
8-12 Wipers = 288 * 144mm
Wind screen wiper compl. with 3m connecting cable 5pol.
Stroke lenght from 425mm up to ? are available.
Wiper arm from 300 up to 1000mm
Wiper blade from 300 up to 1000mm
Control Panel, connecting cable/plug SUB-D 25pol. for the connecting between panel and PSU.
Power supply unit for 24V, 110V, 230V or other voltage